Quick answer
Most damp in an old Cumbrian house is condensation, a leak or rain getting in through failed pointing, render or gutters. Checkatrade calls condensation the most common type. Historic England says the first job is to check and fix whatever is causing the damp, such as a cracked drainpipe, an overflowing drain or a lack of ventilation. A damp survey costs about £300 (Checkatrade, June 2026). Treating rising damp costs about £2,500 on average, penetrating damp about £1,200 and condensation about £600 (MyBuilder, August 2026). Cement render and sealants on a solid stone wall can make the problem worse.
Do stone houses get damp?
Yes. A solid stone wall is meant to get wet and dry out again, so some damp is how it was built to work.Historic England says most houses of traditional construction are built with solid brick or stone. A solid wall has no cavity to stop water, so it relies on soaking up rain and drying out again. Historic England describes the natural materials in these buildings as having the capacity to absorb, store, and later release moisture. That works as long as the wall can dry.
There are three kinds of damp, and they need different fixes (Checkatrade's damp survey guide):
- Condensation is moisture from cooking, washing and drying clothes settling on cold surfaces. Checkatrade calls it the most common type of damp. Look for black mould in corners, behind furniture and on window frames.
- Penetrating damp is rain getting in through cracked render, failed pointing, broken slates, leaking gutters or rotten window frames. It leaves patches that get worse after heavy rain.
- Rising damp is water from the ground drawn up through the base of a wall. It's the one people worry about most, and it often gets the blame for damp that has another cause.
Historic England's advice for every wall type is the same: check and fix anything that is causing or exacerbating damp, such as a cracked drainpipe, an overflowing drain, or a lack of ventilation, before you pay for anything else.
Is rising damp a serious problem?
It can be, but it's rarer than the number of damp proofing adverts suggests. Rising damp is ground water rising up through the wall. Checkatrade says the easiest way to spot it is the tide mark the water leaves on the wall, along with wet skirting boards and wallpaper peeling at the bottom of the wall. If the patch is higher up, under a window or around a chimney, it's far more likely to be rain getting in. If it's black mould in a cold corner, it's condensation.
In an old stone house the usual causes of a wet wall base are outside the wall: ground or a path that has been raised above the floor level inside, a blocked drain, a leaking downpipe, or a cement render that stops the wall drying. Fix those and watch the wall for a few months before anyone injects anything. A chemical damp proof course does nothing for rain or condensation, and it's the most expensive of the three to treat.
How do you stop rising damp on old stone walls?
Start outside. Lower raised ground against the wall, clear the gullies, fix the gutters and downpipes, and get any cement render or hard pointing looked at. Historic England warns that if you use modern impervious materials like cement-based fillings or impermeable coatings in repairs, the wall may decay even faster. The same goes for sealants and tanking slurry painted on the inside of a solid wall: the water has to go somewhere, and it usually climbs higher.
If a surveyor confirms genuine rising damp after the obvious causes are fixed, the options are a chemical injection damp proof course or, more rarely, a physical one. Checkatrade's June 2026 figures put injection at £1,000 to £3,000 for a typical job and a physical damp proof course at £2,500 to £7,500. On a rubble stone wall with a soft lime core, ask the specialist how an injected course is meant to form a continuous barrier, and get a second opinion if the answer is vague.
Whatever is done, the replastering matters. Historic England notes that insulated lime plasters can be an effective solution on solid walls, and the Lake District National Park's design code encourages natural lime for mortars, renders and limewashes. Lime lets the wall keep breathing, where gypsum plaster and cement render seal it in.
Can I treat a damp wall myself?
Condensation, yes. Rising or penetrating damp, usually not. MyBuilder's guide says DIY suits mild cases such as condensation, where better airflow and simple treatments do most of the work, and that rising damp and penetrating damp are jobs for a professional.
For condensation: open windows after showers, use the extractor fan every time, dry washing outside or in one ventilated room, keep furniture a hand's width off cold outside walls, and keep a low background heat on in winter rather than blasting one room. Checkatrade puts a new extractor fan at about £300. A dehumidifier helps while you fix the cause, and it's not a cure on its own.
For a wet patch on an outside wall, the DIY part is the detective work. Go outside in the rain and look at where the water runs: a blocked gutter, a cracked downpipe, a gap round a window, a slipped slate. Those are small repairs, and fixing them does more than painting over the stain inside, which only hides it.
How much does damp proofing cost?
These are national figures. Checkatrade's prices are checked by RICS and CIOB estimators and exclude stripping and replastering, decoration and drying out, so the final bill on an old house is usually higher. Get quotes from local damp specialists and ask what the price includes.
| Job | Typical cost | Source |
|---|---|---|
| Damp survey | £100 to £600, around £300 | Checkatrade, June 2026 |
| Injection damp proof course, per metre | £60 to £200 | Checkatrade, June 2026 |
| Injection damp proofing, typical job | £1,000 to £3,000 | Checkatrade, June 2026 |
| Physical damp proof course retrofit | £2,500 to £7,500 | Checkatrade, June 2026 |
| Cellar or basement tanking, per m² | £100 to £200 | Checkatrade, June 2026 |
| New extractor fan | around £300 | Checkatrade, June 2026 |
| Rising damp treatment, average | around £2,500 | MyBuilder, August 2026 |
| Penetrating damp treatment, average | around £1,200 | MyBuilder, August 2026 |
| Condensation treatment, average | around £600 | MyBuilder, August 2026 |
| Basement and cellar damp, average | around £6,500 | MyBuilder, August 2026 |
MyBuilder's overall range for standard treatments is £500 to £2,000. Checkatrade's average for a typical property, including a new damp course, is around £5,000. So the price depends mostly on what is actually causing the damp.
How much does a damp survey cost?
Around £300, with a range of £100 to £600 (Checkatrade, June 2026). Checkatrade's separate survey guide gives about £200 for a two-bed flat, £400 for a three-bed terrace and £600 for a four-bed detached house, with roughly £50 on top for a same-day visit. A damp and timber survey, which some mortgage lenders ask for, is £200 to £600.
Is it worth it? Usually, yes, if the surveyor is independent. A free survey from a company that sells damp proofing tends to find damp proofing. Checkatrade advises using surveyors with a CRDS or CSRT qualification; CSRT is the Property Care Association's damp and timber qualification. For a listed building or anything in the National Park, Historic England suggests advisers with experience of old buildings.
A survey isn't invasive. The surveyor looks inside and out, takes meter readings on the walls and may lift a carpet edge or check under a floor. If they find damp, you get a written report saying what type it is, where it's coming from and what they recommend. Treat that report as a second quote, and compare it against the simple outside fixes first.
What's different in Cumbria
Rain, mostly. The Met Office says some sites in the Lake District get more than 4 metres of rain a year. A solid stone wall facing the prevailing weather spends much of the winter wet, which is why damp on the west or south-west side of a house is so common here.
The houses were built for it. The Lake District National Park's design code notes that local stone was often traditionally covered with layers of limewash, and that roughcast render gets its name because pebbles are mixed with the lime to give a larger surface area for water to evaporate from in wet conditions. Replacing that lime coat with cement render, or stripping it back to bare stone because it looks nicer, changes how the wall sheds water. The park's sustainable design code encourages natural lime for mortars, renders and limewashes and discourages concrete and cement, including in render and other finishes. If your house is listed or in a conservation area, check with the planning authority before changing a finish.
Floods leave damp behind. In December 2015 the Environment Secretary told Parliament that in Carlisle over 2,000 properties flooded, with over 600 in both Kendal and Keswick and over 200 in Appleby. A solid stone wall that has stood in flood water holds it for months, and a hard modern finish on the inside slows the drying. If you're buying a house in a street that flooded, ask what was done to dry it out and whether the plaster was replaced.
Find a damp specialist near you
Damp specialists and plasterers listed in the directory, by town. Ask whether they've worked on solid stone walls, and whether they plaster in lime. See all damp specialists in Cumbria and plasterers in Cumbria.
Frequently asked questions
Is it normal for old houses to have damp?
Some moisture in a solid stone wall is normal. Historic England describes traditional materials as absorbing, storing and later releasing moisture. It becomes a problem when the wall can't dry out, usually because of a blocked gutter, raised ground, a cement finish or too little ventilation.
What does rising damp look like?
A tide mark along the bottom of a ground-floor wall, wet or crumbling skirting boards, and wallpaper peeling at the bottom of the wall (Checkatrade). Damp higher up the wall, around windows or on a ceiling is rain getting in, and black mould in cold corners is condensation.
Can rising damp be permanently fixed?
Yes, once the real cause is found. Often that means lowering outside ground levels, fixing drains and gutters and removing cement render, and then letting the wall dry. If a surveyor confirms genuine rising damp after that, a new damp proof course can be installed.
How do you permanently remove damp from walls?
Stop the water getting in, then let the wall dry, then replaster with a breathable finish. Historic England's advice is to check and fix anything that is causing or exacerbating damp first. Sealing the inside of a wet solid wall usually pushes the damp somewhere else.
How do I stop damp from coming through brickwork or stonework?
Penetrating damp comes through cracks, failed pointing, damaged render and leaking gutters (Checkatrade). Repair those with materials that match the wall. On a traditional wall that means lime pointing and lime render, because Historic England warns that cement-based fillings and impermeable coatings can make the wall decay faster.
How can I dry out damp walls quickly?
There's no quick way with a solid stone wall. Fix the source, improve ventilation, keep gentle heat on, and give it time. A dehumidifier helps with condensation and speeds drying after a leak, and it won't cure a wall that's still being fed with water.
Can I damp proof my house myself?
You can deal with condensation yourself with ventilation, extractor fans and heating, and you can fix small leaks and gutters. MyBuilder's guide says rising damp and penetrating damp are jobs for a professional.
Why is damp proofing so expensive?
The injection or new damp course is only part of it. Checkatrade's prices exclude stripping plaster, making good, decorating and drying out, and MyBuilder lists replastering and repainting as common extra costs. On an old stone house that making good is often most of the bill.
What happens if a surveyor finds damp?
You get a written report saying what type of damp it is, where it's coming from and what they recommend, usually with a quote. Treat it as one opinion. Fix the simple outside causes first and get a second quote before paying for a damp course.
Damp in the house: who do you call?
For a leak, a plumber or roofer. For rain coming through a wall, a builder or roofer who works with lime. For a suspected rising damp problem, an independent surveyor with a CSRT or CRDS qualification, then a damp specialist. The directory lists damp specialists and plasterers by town.
How much compensation for damp and mould in the UK?
There's no set figure. If you rent from a council or housing association in England, Awaab's Law (GOV.UK) says significant damp and mould hazards must be investigated within 10 working days and made safe within 5 working days, with emergency repairs within 24 hours. If your landlord doesn't act, complain through their process and then to the Housing Ombudsman.
This guide is a plain-English summary for homeowners, not legal or technical advice. Rules and prices change, so check the linked sources and ask a registered tradesperson about your own property.
Are you a tradesperson in Cumbria?
Claim your free listing — add your logo, website, reviews and full details, and stand out to local customers.
Claim your free listing →